Products
POWERHOUSE DOOR HASP LOCK SILVER STAINLESS STEEL 2.5 INCHES
| Specifications: |
| Material: Stainless Steel Metal |
| Size(cm): 3 x 2 x 8 |
| Latches without locking |
| Requires key to unlock |
POWERHOUSE DRAIN CLEANER / SINK AUGER CLEANING MACHINE 300W PH-DCM-300W
| Specifications |
| Power: 300 Watts |
| Switch: CVT Switch, can reverse |
| Rotating Speed: 0-560 rpm |
| Dredging capability: 3/4″ – 2″ |
POWERHOUSE DRILL CHUCK KEY 3/8”
| Specifications: |
| SIZE: 3/8” |
| 100% brand new |
| Durable |
| High Quality |
| Features: |
| Used to hold a cylinder object |
| On a lathe, it holds the rotating piece—whereas on a drill or mill, it holds the rotating |
POWERHOUSE DRILL CHUCK THREADED WITH KEY AND SDS ADAPTOR 10MM
| Specifications: |
| SIZE: 10mm |
| 100% Brand New |
| High Quality |
| Durable |
| Heavy Duty |
| Features: |
| Allows a quick changes of drill bit |
| To hold a drill or other cutting tools on a spindle |
POWERHOUSE DRILL CHUCK W/ KEY 3/8″
| Specifications: |
| SIZE: 3/8 Inch |
| 100% Brand |
| Authentic |
| Heavy Duty |
| New High |
| Quality Durable |
| Used to hold a cylinder object. On a lathe, it holds the rotating piece—whereas on a drill or mill, it holds the rotating |
POWERHOUSE DRILL CHUCK WITH KEY 1/2”
| Specifications: |
| SIZE: 1/2” |
| 100% Brand |
| Authentic |
| Heavy Duty |
| High Quality |
| Durable |
| Used to hold a cylinder object. On a lathe, it holds the rotating piece—whereas on a drill or mill, it holds the rotating |
POWERHOUSE DRILL PRESS 250W (1/3 HP) PH-4113
| Specifications: |
| Power: 250 Watts (1/3 HP) |
| Capacity: 13mm / 1/2″ Maximum Bit capacity |
| Spindle Travel: 50mm |
| Table Size: 160 x 160mm |
| Base Size: 290 x 290mm |
| Column Diameter:46mm |
| Height: 580mm |
POWERHOUSE DYNA GRIP WOOD CHISEL 1 INCH
| Specifications: |
| Size 1 inch |
| Hardened, quenched and tempered for long life and added safety |
| Forged chrome vanadium steel for increased strength and durability |
POWERHOUSE DYNA GRIP WOOD CHISEL 1/2 INCH
| Specifications: |
| Size 1/2inch |
| Hardened, quenched and tempered for long life and added safety |
| Forged chrome vanadium steel for increased strength and durability |
Out of stock
POWERHOUSE ELECTRIC BLOWER 700W PH-AB828
| Wind: 2.8 M³ |
| Frequency: 60 Hz |
| Rated Voltage: 220 V |
| Rated Input Power: 750W |
| No-Load Speed: 0-16000 RPM |
POWERHOUSE ELECTRIC DRILL PHB-ED10RE
| SPECIFICATIONS |
| RATED VOLTAGE: 220V |
| DRILL CHUCK: 10MM |
| NO-LOAD SPEED: 0-2800 RPM |
| RATED INPUT POWER: 600W |
| FREQUENCY: 60 HZ |
POWERHOUSE ELECTRIC DRILL PHB-ED13RE
| Specifications: |
| Rated Power Input: 700 W |
| Rated Frequency: 60 Hz |
| Rated Voltage: 220 V |
| Drill Chuck: 13 mm |
| No Load Speed: 0-3600 rpm |
POWERHOUSE ELECTRIC POLISHER PH-M-P9227
| SPECIFICATIONS |
| POWER: 1650 W |
| VOLTAGE: 220V-60HZ |
| DISC CAPACITY: 180 MM |
| NO LOAD SPEED: 800-300 RPM |
POWERHOUSE ELECTRIC SPRAY GUN 600W PH-ESG-600S
| Rated Power: 600 Watts | Volume: 1,000 L/min |
| Max Viscosity: 100 DIN-S (run out time: 100seconds) | Air Hose Length: 1.8 meters |
| Nozzle Size: 3.0,2.5, 2.0mm | Canister Capacity: 1000 ml |
| Heavy Duty | Stainless Cup |
| Solvent containing and water-dilutable enamel paints, varnishes, primers,two-component paint, clear enamels, motor vehicle enamels, mordants and wood preservatives |
POWERHOUSE ENERGIE SERIES GASOLINE GENERATOR RECOIL START (PH-ENERGIE-4500-GAS)
| Specifications: |
| Rated Power: 1800W/1.8kW |
| Fuel Tank Capacity: 5.5L |
| Rated Voltage: 220/230V |
| Frequency: 60Hz |
| Rated Power Factor: 1.0 |
| Rated Current: 6.8A |
POWERHOUSE ENERGIE SERIES GASOLINE GENERATOR RECOIL START (PH-ENERGIE-7000-GAS)
| Specifications: |
| Rated Power: 4500W/4.5kW |
| Fuel Tank Capacity: 15 L |
| Rated Voltage: 220V |
| Frequency: 60Hz |
| Rated Power Factor: 1.0 |
| Continues Run: 4-5 Hrs |
| Resting / Cooling Time: 30 – 60 minutes |
| Cooling System: Air Cooled |