Lotus
LOTUS AIR BLOW GUN NOZZLE 1/4″ LTBG200
₱185.00| 1/4″ Air Inlet | Bar up to 100 PSI |
| Easy connect Air hose | 200mm long & thin barrel |
| Heavy duty enough for workshop and garage | Remove dirt, dust and small particles from any surface |
LOTUS AIR CHUCK LAC023/LTHT14ACX
₱139.00| Quick and easy to connect | Use to infiate car and bike tires |
| Fits to many mini air compressor very well | Alloy material with brass plating, high strength, anti-wear and durable |
LOTUS AIR COCK WITH NUT 1/4″ (13MM X 18G) LTHT14AVX
₱148.00| Material: Brass and plastic | Color: Brass and red tone |
| Air cock, pipe size 1/4″ male thread to male barbed hose | Hand tightening provides metal to metal seal |
| Self-locking type design, more convenient to use | Drain cock shutoff with forged brass body, lever handle |
LOTUS ALUMINUM LEVEL 12″/300MM LAL3001M
₱208.00| 12 Inches | Accurate to 1.0mm/m |
| Lightweight aluminum box section body | Magnetic Aluminum Level for DIY and trade |
| Easy to clean epoxy finish to all surfaces | 2 plumb, 1 horizontal vial, permanently fixed |
LOTUS ALUMINUM LEVEL 18″/450MM LAL4501M
₱369.00| 18 Inches | Accurate to 1.0mm/m |
| Lightweight aluminum box section body | Magnetic Aluminum Level for DIY and trade |
| Easy to clean epoxy finish to all surfaces | 2 plumb, 1 horizontal vial, permanently fixed |
Out of stock
LOTUS ALUMINUM LEVEL 24″/600MM LAL6001M
₱350.00| Lightweight aluminum box section body | Magnetic Aluminum Level for DIY and trade |
| Easy to clean epoxy finish to all surfaces | 2 plumb, 1 horizontal vial, permanently fixed |
| 24 Inches |
Out of stock
LOTUS ANGER BIT 13MM LAB-813
₱250.00| Size: 13MM | Surfaces: Wood and Thin Metal |
| Extended working life | Usually use in Drilling holes |
| Offering good drilling speeds | Split point drill bits |
Out of stock
LOTUS ANGER BIT 16MM LAB-816
₱299.00| Size: 16MM | Surfaces: Wood and Concrete |
| Extended working life | Usually use in Drilling holes |
| Offering good drilling speeds | Split point drill bits |
LOTUS ANGLE GRINDER 650W LAG115Z1/LTSG6500S
₱1,100.00| Rated Input Power: 650W |
| Rated Frequency: 60Hz |
| Rated Voltage: 220V |
| Rated Speed: 12,000RPM |
| Spindle Thread: M10 |
| Max. Disc Diameter: 100mm |
LOTUS ARGON REGULATOR 15MPa LTRR626B
₱1,500.00| Gas Type : Argon | Nominal Flow Rate: 0-25LPM |
| Inlet Pressure: 15MPa | Regulator Type : Single Stage |
| Inlet Connection: G 5/8″ /Female Thread |
Out of stock
LOTUS AUTO DARKENING HELMET LTWH500
- 2 Step Arc Sensors for Higher Response Rate
- Auto Darkening Feature
- Adjustable Welding Shade Levels DIN 9 to 13
- Sensitivity Control
- Solar Powered
- High Impact Resistant Nylon
- Dimming rate: 1/30000 sec
Sale
LOTUS AVIATION SNIP LEFT (RED) LAS250L
₱299.00| Cuts up to 18 gauge steel | Double Overwind Spring for longer life |
| Exceeds ANSI standards for cutting performance and durability | Excellent for cutting aluminum, vynil siding, screening cardboard leather & copper |
Sale
LOTUS AVIATION SNIP RIGHT (GREEN) LAS250R
₱299.00| Cuts up to 18 gauge steel | Double Overwind Spring for longer life |
| Exceeds ANSI standards for cutting performance and durability | Excellent for cutting aluminum, vynil siding, screening cardboard leather & copper |
Sale
LOTUS AVIATION SNIP STRAIGHT (YELLOW) LAS250S
₱299.00| Cuts up to 18 gauge steel | Double Overwind Spring for longer life |
| Exceeds ANSI standards for cutting performance and durability | Excellent for cutting aluminum, vynil siding, screening cardboard leather & copper |
Out of stock
LOTUS BATTERY CHARGER 18V LTFC1800
₱1,725.00| 18 Volts | Battery charge time : 25 min |
| Compact lightweight | Flexible power system |
| Compatible with all X-line 18V tools range | Battery indicator both charging and full charge |
Out of stock
LOTUS BATTERY PACK 18V 2.0AH LTBP18G-2
₱2,000.00| Voltage: 18V | Capacity: 2.0Ah |
| Type: Compact | Advanced technology |
| Lightweight and compact profile for added versatility | Compatible with all 18V X-line Lotus Cordless System |