Drills & Drivers
ARTU HOLESAW 19MM
| Air Tank Capacity : 8 Gallon |
| Cut-in Pressure : 125PSI |
| Cut-out Pressure : 150PSI |
| CFM @ 40PSI : 4PSI |
| CFM @ 90PSI : 5PSI |
| Power Cord : SJT 16 AWG / 72 in. length |
ARTU HOLESAW 25MM
| Cut-in Pressure : 120PSI |
| Cut-out Pressure : 150PSI |
| CFM @ 40PSI : 4.8PSI |
| CFM @ 90PSI : 3.7PSI |
ARTU HOLESAW 38MM
| APPLICATION – CAN BE USED IN: |
| Wood, Copper Wall |
| Hot Roll and Cold Roll Sheet, Plasterboard |
| Aluminum, Nickel |
| PVC / Plastics Sheets, Magnesium |
| Stainless (Thin Gauge), Tin |
ARTU SDS PLUS FLAT CHISEL
| 3/4-Inch chisel tip |
| For concrete and masonry demolition |
| One-piece design |
DEWALT PERCUSSION DRILL BARE DWD024
Power Input: 701w
Max Torque: 8.6nm
No Load Speed: 0-2800 rpm
Blows per minute: 47600 bpm
Spindle Thread: ½ x 20 U.N.F
Weight: 1.82kg
Max. Drill Cap. (Wood): 25mm
Max. Drill Cap. (Steel): 13mm
Max. Drill Cap. (Concrete): 16mm
HIGHLIGHTS:
* Low weight ensures the drill is easy to use and it reduces are user fatigue
* “Lock on” button gives the user to keep the machine continually running when doing repetitive operations
INGCO IMPACT DRILL ID8505
| INGCO Impact Drill ID8508 (850W) |
| Voltage: 220-240v 50/60Hz |
| Input Power: 850w |
| Drilling Capacity: 13mm |
| Variable Speed |
| Hammer Function |
| Dimensions: 35.56×9.4×27.94cm |
| Weight: 2.64kg |
INGCO LITHIUM-ION CORDLESS DRILL CDLI2002
| Ingco Lithium-Ion Cordless Drill CDLI2002 |
| Voltage: 20V |
| Two speed: 0-400 / 0-1500 / min |
| Maximum torque: 45NM |
| Ability Headset: 0.8 |
| 10mm– Automatic two-way locking mechanism |
| Dimensions: 35x10x21cm |
| Weight: 3kg |
INGCO ROTARY HAMMER RGH9018
| INGCO Rotary Hammer 800W RGH9018 |
| Voltage:220-240V~50/60Hz |
| Input power:800W |
| No-load speed:0-1200rpm |
| Impact rate:0-5300bpm |
| Impact energy:2.5J |
| Max.drilling capacity: Concrete:26mm /Steel:13mm / Wood:30mm |
| SDS plus chuck system |
| Dimensions: 43×30.5x12cm |
| Weight: 5.72kg |
LOTUS DRILL PRESS 1-1/2HP (20MM) LTDP900
| Motor Power: 900W | Rated Volts: 220V |
| Rated Frequency: 60Hz | Class Of Speed: 16 |
| Table Size: 290X290mm | Base Size: 460X272mm |
| Column Diameter.: ᴓ72 | Spindle Taper: MT #2 |
| Swing (MM): 360 | Drilling Capacity: 20mm (3/4″) |
LOTUS DRILL PRESS 3/4HP (16MM) LTDP550
| Motor Power: 550W | Rated Volts: 220V |
| Rated Frequency: 60Hz | Drilling Capacity: 16mm(5/8”) |
| Class of Speed: 16 | Spindle Taper: MT#2 |
| Table Size: 250X250mm | Base Size: 420X250mm |
| Column Dia.: Φ72 | Swing (MM): 325 |