PUMP
GOULDS PUMP 85GS50 5HP 40-120GPM/60HZ/3450RPM
| Specification: |
| Stainless Steel Submersible Pump for 4” And Larger Wells |
| Innovative, Proven Hydraulics |
| Up to 13% Efficiency Improvement |
| Fewer models, same hydraulic coverage. |
| Premium Stainless Steel casing, motor adapter, discharge head |
| Built-in Stainless Steel check valve |
| Convenient Serviceability |
| Superior Sand Handling |
GOULDS PUMP 85GS75 7 1/2HP 40-120GPM/60HZ/3450RPM
| Specifications: |
| Innovative, Proven Hydraulics |
| Up to 13% Efficiency Improvement |
| Fewer models, same hydraulic coverage. |
| Premium Stainless Steel casing, motor adapter, discharge head |
| Built-in Stainless Steel check valve |
| Convenient Serviceability |
| Superior Sand Handling |
GOULDS SJ07 DEEP WELL JET PUMP 3/4HP
| Specifications: |
| 3/4HP |
| STAGE: 2 |
| PRESSURE PIPE SIZE (IN.): 1 |
| SUCTION PIPE SIZE (IN.): 1 1/4 |
| WEIGHT: 58 |
| LENGTH: 14 |
| WIDTH: 8 |
| HEIGHT: 15 1/2 |
GOULDS SJ10 DEEP WELL JET PUMP 1HP
| Specifications: |
| 1HP |
| STAGE: 2 |
| PRESSURE PIPE SIZE (IN.): 1 |
| SUCTION PIPE SIZE (IN.): 1 1/4 |
| WEIGHT: 63 |
| LENGTH: 14 |
| WIDTH: 8 |
| HEIGHT: 16 |
GOULDS SJ15 DEEP WELL JET PUMP 1 1/2HP
| Specifications: |
| 1 1/2HP |
| STAGE: 3 |
| PRESSURE PIPE SIZE (IN.): 1 |
| SUCTION PIPE SIZE (IN.): 1 1/4 |
| WEIGHT: 77 |
| LENGTH: 14 |
| WIDTH: 8 |
| HEIGHT: 20 |
GOULDS SJ20 DEEP WELL JET PUMP 2HP
| Specifications: |
| 2HP |
| STAGE: 3 |
| PRESSURE PIPE SIZE (IN.): 1 |
| SUCTION PIPE SIZE (IN.): 1 1/4 |
| WEIGHT: 88 |
| LENGTH: 14 |
| WIDTH: 8 |
| HEIGHT: 20 1/2 |
INGCO SUBMERSIBLE PUMP 750W/ 1HP SPC7508-5
| Specifications: |
| Voltage:220-240V~50Hz |
| Output power: 750W(1.0HP) |
| Max.head:32M |
| Max.flow:7.5M3/H |
| Stainless steel base |
| Stainless steel screws |
| Stainless steel shaft |
| Pipe diameter:1” |
| Copper wire motor |
| 9M length cable |
| Thermal protection |
| WITH FLOAT SWITCH |
M-AQUA WATER PUMP 1.3HP
| Specifications: |
| 220v |
| 1.3hp |
| 60hz |
| 3400rpm |
| h.max: 45m |
| Q.max: 55 L/min |
MAILTANK SELF-PRIMING JET PUMP 0.6HP SH107
| Specifications: |
| Power: 0.6HP |
| Voltage: 220-240v |
| Phase: single |
| RPM: 2850 |
| Frequency: 60 HZ |
| Maximum head: 36 Meters |
| Maximum volume: 36L/min |
| Features: |
| 100% copper winding to meet the standard peak power. |
| Built-in thermal overload protector for motor protection against high temperature. |
| max pressure can reach up to 40-50psi |
| Silent type motor for user’s comfort |
| Brass Impeller for longevity of use |
| Closed type motor, suitable use for outdoors |
MAILTANK SELF-PRIMING JET PUMP 1HP SH320
| Specifications: |
| Power source: 220V / 60Hz |
| Output: 1100W (1HP) |
| Suction Lift: 9M |
| Discharge Head: 40M |
| Capacity: 50L/min |
| RPM: 2850 |
| Suction & Discharge Pipe: 1” x 1” |
| Features: |
| PRIMING: Fill the pump completely with clean water before switching it on. The water should be poured in through the priming plug. When you have completed the operation, screw the plug back in again and start the pump. The pump should be primed again whenever it has not been used for a long period of time or when air has made its way into the system |
| IMPORTANT: Never run the pump empty. If this happens by mistake, switch the pump off, wait for it to cool down and then prime it using clean water |
MAXIPRO ELECTRIC STAINLESS HEAD PUMP 1.0HP JETS100 BOOSTER PUMP
| Specifications: |
| 220Volt |
| 1hp |
| 3450 RPM |
| Max. L/M 52 |
| Max. Head 50m |
| Suction Max. 9m |
MAXIPRO SHALLOW WATER PUMP 1/2HP QB60
| Specifications: |
| Power: 1/2HP |
| voltage: 220v |
| Phase: single |
| Rpm: 3,450rpm |
| Frequency: 60 hertz |
| Maximum head: 36meters |
| Capacity: 36 L/min |
WIZZ SHALLOW WATER PUMP 1HP WJSW/10M
| Specifications: |
| 1hp |
| H max: 35m |
| Q max: 80 l/min |
| 5z 60 |
| 220V |
YAMATO JET80-L WATER PUMP 0.75HP
| Specifications: |
| 220v |
| 0.75hp |
| 60hz |
| 3400rpm |
| h.max: 45m |
| Q.max: 45 L/min |