Power Tools
AEG ANGLE GRINDER WS2200180 7″
| Power input 2,200 watt |
| No load speed 8,500 rpm |
| Grinding Disc Ø 180 mm |
| Spindle thread M14 |
| Weight 5.7 k |
AEG CIRCULAR SAW KS-66-2 7 1/2″
| Power input 1,600 watts |
| No load Speed 5,800 rpm |
| Bevel 0⁰ – 56⁰ |
| Cutting depth at 63 / 47 / 36 mm |
| Saw blade / Arbor ø 190/ 20 mm |
| Weight 4.8 kg |
AEG DEMOLITION HAMMER PM-10E
| Power Input: 800 watts |
| No Load Speed: 1500 rpm |
| Impact Energy: 2.9J |
| Hammer Rate (Full Load): 0-4, 500 bpm |
| Drilling concrete / steel / wood 26 /13 / 30 mm |
AEG JIGSAW STEP STEP-100X
| Power Input: 700 watts |
| No Load Stroke Rate: 1,000 – 3,200 spm |
| Mitre Cutting Angle to 45⁰ |
| Stroke: 20mm |
| Pendulum Settings: 4 stages |
AEG ROTARY DRILL B-380-RE
| Power Input: 380 watts |
| No Load Speed: 0- 2, 600 rpm |
| Drilling steel / aluminum / wood 10 /13 / 20 mm |
| Weight: 1.25 kg |
AEG SDS PLUS ROTARY HAMMER KH26E
| Power Input: 800 watts |
| No Load Speed: 1500 rpm |
| Impact Energy: 2.9J |
| Hammer Rate (Full Load): 0-4, 500 bpm |
| Drilling concrete / steel / wood 26 /13 / 30 mm |
ARTU ALL ROUND SPECIAL DRILL HEAVY DUTY 1/8X3″
| One drill bit does it all, hardened steel, |
| spring steel, concrete, brick, ceramic and even glass. |
ARTU HOLESAW 19MM
| Air Tank Capacity : 8 Gallon |
| Cut-in Pressure : 125PSI |
| Cut-out Pressure : 150PSI |
| CFM @ 40PSI : 4PSI |
| CFM @ 90PSI : 5PSI |
| Power Cord : SJT 16 AWG / 72 in. length |
ARTU HOLESAW 25MM
| Cut-in Pressure : 120PSI |
| Cut-out Pressure : 150PSI |
| CFM @ 40PSI : 4.8PSI |
| CFM @ 90PSI : 3.7PSI |
ARTU HOLESAW 38MM
| APPLICATION – CAN BE USED IN: |
| Wood, Copper Wall |
| Hot Roll and Cold Roll Sheet, Plasterboard |
| Aluminum, Nickel |
| PVC / Plastics Sheets, Magnesium |
| Stainless (Thin Gauge), Tin |
ARTU SDS PLUS FLAT CHISEL
| 3/4-Inch chisel tip |
| For concrete and masonry demolition |
| One-piece design |
DAIDEN INVERTER WELDING MACHINE HEAVY DUTY 200AMP DDIW-200A
| Power Voltage: AC220V+15% | Frequency (Hz): 50/60 |
| Rated Output (A): 21 Output Current (A): 200A |
No Load Voltage (V): 60 |
| Force Range (A): 0-100 | Lightweight and portable |
| Duty Cycle (%): 40 | Phase: Single |
| With complete accessories |
buildwisedepot.com
DCA ANGLE GRINDER ASM125A
Specifications:
| Maximum Wheel Diameter | 125 mm |
| Hole Diameter of Wheel | 22 mm |
| Power Input | 850 W |
| Rated Speed | 11,800 rpm |
Net Weight: 1.8kg
DCA DIAMOND DRILL WITH WATER SOURCE AZZ200
Specifications:
Rated Power Input (W): 3300
No-Load Speed (r/min): 500
Max Drilling Capacity (mm): 200
Net Weight: 22
DCA DIE GRINDER ASJ03-25
Specifications:
Max. Grinding Wheel Diameter (mm): 25
Rated Power Input (W): 400
Rated Speed (r/min): 27000
Net Weight: 1.8