Drill Bit
MAKITA HSS-R DRILL BIT 5” (D-38401) FOR METAL
| Specifications: |
| HSS-R Drill Bit |
| Drill Bit for Metal |
| Sizes: (5.0mm x 86mm) & (6.0mm x 93mm) |
| Set: 1 Piece |
| DIN 338 |
| Max. Strength: 900 N/mm², molten iron, plastics and metals non-ferrous metals |
| Drill Bits for cutting in metal with an angle in the tip 118° |
| Bisel spiral edge for a best evacuation from the good chip |
| Features: |
| The drill bits are suitable in combination with a machine equipped with a 10-13 mm drill bit |
| Minimum risk snapping diameters, possibility to Flex material |
| Wire helix with two outputs for an effective evacuation leftover material |
MAKITA HSS-R DRILL BIT 6” (D-38423) FOR METAL
| Specifications: |
| HSS-R Drill Bit |
| Drill Bit for Metal |
| Sizes: (5.0mm x 86mm) & (6.0mm x 93mm) |
| Set: 1 Piece |
| DIN 338 |
| Max. Strength: 900 N/mm², molten iron, plastics and metals non-ferrous metals |
| Drill Bits for cutting in metal with an angle in the tip 118° |
| Bisel spiral edge for a best evacuation from the good chip |
| Features: |
| The drill bits are suitable in combination with a machine equipped with a 10-13 mm drill bit |
| Minimum risk snapping diameters, possibility to Flex material |
| Wire helix with two outputs for an effective evacuation leftover material |
MAKITA HSS-R METAL DRILL BIT 2.6 (METAL) D-38320
| Specifications: |
| Diameter: 2.6mm |
| Length: 57mm |
| Working Length: 30mm |
| Recording External: Diameter 2.6mm |
| Ideally suited for: cast iron, plastics |
| Suitable for: sheet steel, wood |