Makita
MAKITA ELECTRIC PLANER 500W (3-1/4″ X 1/32″) M-SERIES M1902B
| Specifications: |
| M1902B |
| Electric (M-Series) |
| Planer |
| 500 Watts |
| Size: 3-1/4″ x 1/32″ |
| No Load Speed: 16,000 RPM |
| Power Supply Cord : 2.0 m (6.6ft) |
MAKITA FLAT BIT 1-1/2” (38.1mm) D-26509 FOR WOOD
| Specifications: |
| Flat Bit |
| For Wood |
| Sizes:1″ (25.4mm) |
| Features: |
| For fast cut in wood |
| Flat drill bits go with high speeds and are used in power drills and screwdrivers, whether powered or cordless |
| Flat drill bits hold an added interest for any workman who needs to pull a cable through a pierced wall |
MAKITA FLAT BIT 1” (25.4MM) D-24614 FOR WOOD
| Specifications: |
| Flat Bit |
| For Wood |
| Sizes:1″ (25.4mm) |
| Features: |
| For fast cut in wood |
| Flat drill bits go with high speeds and are used in power drills and screwdrivers, whether powered or cordless |
| Flat drill bits hold an added interest for any workman who needs to pull a cable through a pierced wall |
MAKITA GA7020 ANGLE GRINDER 7” 2200W
| Specifications: |
| Angle Grinder |
| GA7020 |
| Continuous rating input 2,200W |
| Wheel Diameter180 mm (7″) |
| No Load Speed (RPM)8,500 |
| Vibration Level |
| Surface Grinding with Anti-Vibration Side Grip: 8.0 m/s² |
| Disc Sanding: 2.5 m/s² |
| Sound Pressure Level89 dB(A) |
| Sound Power Level100 dB(A) |
| Dimensions (L x W x H)473x200x140 mm (18-5/8″x7-7/8″x5-1/2″) |
| Net weight5.56 – 6.06 kg (12.26 – 13.36 lbs) |
| Power supply cord2.5 m (8.2 ft) |
MAKITA GB602W BENCH GRINDER 6″ 250W
| Specifications: |
| Bench Grinder |
| GB602W |
| Continuous rating Input: 250W |
| Wheel diameter: 150mm (6″) |
| Wheel width: 6.4mm (1/4″) / 16mm (5/8″) |
| Hole dia.: 12.7mm (1/2”) |
| H.P.: 1/3 |
| No load speed (RPM): 2,850 (50Hz) / 3,450 (60Hz) |
| Dimensions (L x W x H): 375x348x286mm |
MAKITA GLASS BIT WITH STRAIGHT SHANK D-25111 / 3MM
| Specifications: |
| Diameter (mm): 3 |
| Overall length (mm): 65 |
| Features: |
| For Tiles, Porcelains, Ceramics and non-toughened Glass |
| Precision ground carbide tip |
| Suitable for slow speed drilling with coolant (water or turps) |
MAKITA GLASS BIT WITH STRAIGHT SHANK D-25127 / 4MM
| Specifications: |
| Diameter (mm): 4 |
| Overall length (mm): 65 |
| Features: |
| For Tiles, Porcelains, Ceramics and non-toughened Glass |
| Precision ground carbide tip |
| Suitable for slow speed drilling with coolant (water or turps) |
MAKITA GLASS BIT WITH STRAIGHT SHANK D-25133 / 5MM
| Specifications: |
| Diameter (mm): 5 |
| Overall length (mm): 65 |
| Features: |
| For Tiles, Porcelains, Ceramics and non-toughened Glass |
| Precision ground carbide tip |
| Suitable for slow speed drilling with coolant (water or turps) |
MAKITA GLASS BIT WITH STRAIGHT SHANK D-25149 / 6MM
| Specifications: |
| Diameter (mm): 6 |
| Overall length (mm): 65 |
| Features: |
| For Tiles, Porcelains, Ceramics and non-toughened Glass |
| Precision ground carbide tip |
| Suitable for slow speed drilling with coolant (water or turps) |
MAKITA GLASS BIT WITH STRAIGHT SHANK D-25161 / 10MM
| Specifications: |
| Diameter (mm): 10 |
| Overall length (mm): 80 |
| Features: |
| For Tiles, Porcelains, Ceramics and non-toughened Glass |
| Precision ground carbide tip |
| Suitable for slow speed drilling with coolant (water or turps) |
MAKITA GLASS BIT WITH STRAIGHT SHANK D-25177 / 12MM
| Specifications: |
| Diameter (mm): 12 |
| Overall length (mm): 80 |
| Features: |
| For Tiles, Porcelains, Ceramics and non-toughened Glass |
| Precision ground carbide tip |
| Suitable for slow speed drilling with coolant (water or turps) |
MAKITA HAMMER DRILL (10MM) 500W M-SERIES M0800M
| Specifications: |
| Hammer Drill |
| M0800M |
| Size: 10mm |
| 500W |
| M-Series |
| Capacity Concrete: 10 mm (3/8″) |
| Steel: 10 mm: (3/8″) |
| Wood: 20 mm: ( 13/16″) |
| Chuck Capacity: 1.5 – 10 mm (1/16″ – 3/8″) |
| Blows Per Minute BPM: 0 – 48,000 |
| No Load Speed RPM: 0 – 3,200 |
| Power supply cord: 2.0 m (6.6 ft) |
MAKITA HP1630 HAMMER DRILL 5/8″ 710 WATTS
| Specifications: |
| HP1630 |
| 710 Watts |
| Genuine Makita HP1630 Hammer Drill |
| Continuous power input: 710 W |
| With Variable speed |
| Reversing Hammer Drill |
| No load speed: 3,200 rpm |
| Drilling capacity on steel: 13 mm (1/2″) |
| Drilling capacity on wood: 30 mm (1-3/16″) |
| Drilling capacity on concrete: 16 mm (5/8″) |
| Impact per minute 0-48,000 ipm |
| Dimensions: 29.6 cm x 7.5 cm x 20.4 cm |
| Power supply cord 2m (6.6ft) |
| Supplied with Makita Hard Case |
MAKITA HP1630K HAMMER DRILL 5/8″ 710W (VARIABLE SPEED & REVERSIBLE) WITH CARRYING CASE
| Specifications: |
| Hammer Drill with Carrying Case (Variable Speed & Reversible) |
| HP1630K |
| Continuous rating input: 710W |
| Concrete: 16 mm (5/8″) |
| Steel: 13 mm (1/2″) |
| Wood: 30 mm (1-3/16″) |
| No Load Speed (RPM): 0 – 3,200 |
| Impacts Per Minute (IPM): 0 – 48,000 |
| Vibration Level: Hammer Drilling Into Concrete: 17.0 m/s² |
| Sound Pressure Level: 97 dB(A) |
| Sound Power Level: 108 dB(A) |
| Dimensions (L x W x H): 296x75x204 mm (11-5/8″x2-15/16″x8″) |
| Net weight: 2.1 kg (4.6 lbs) |
MAKITA HP332DWYE 21 N·M CORDLESS HAMMER DRIVER DRILL 12VMAX CXT™ LI-ION [KIT] (3/8″)
| Specifications: |
| Cordless Hammer Driver Drill CXT™ Li-Ion Kit |
| HP332DWYE |
| 21 N·m 12Vmax |
| Capacity Steel / Wood / Masonry: 10 / 28 / 8 mm (3/8″ / 1-1/8″ / 5/16″) |
| Chuck Capacity 0.8 – 10 mm (1/32″ – 3/8″) |
| Impacts Per Minute (IPM) High / Low: 0 – 22,500 / 0 – 6,750 |
| No Load Speed (RPM) High / Low: 0 – 1,500 / 0 – 450 |
| Max Fastening Torque Hard / Soft: 35 / 21 N·m (310 / 190 in.lbs.) |
| Max Lock Torque 32 N·m (280 in.lbs.) |
| Vibration Level Hammer Drilling into Concrete: 12.5 m/s² |
| Vibration K Factor Hammer Drilling into Concrete: 1.5 m/s² |
| Vibration Level Drilling into Metal: 2.5 m/s² or less |
| Vibration K Factor Drilling into Metal: 1.5 m/s² |
| Sound Pressure Level 82 dB(A) |
| Sound Power Level 93 dB(A) |
| Noise K Factor 3 dB(A) |
| Dimensions (L x W x H) 168x66x217 mm (6-5/8″x2-5/8″x8-1/2″) |
| Net weight 1.1 – 1.3 kg (2.4 – 2.8 lbs.) |
MAKITA HSS-R DRILL BIT 3” (D-38336) 2PCS FOR METAL
| Specifications: |
| HSS-R Drill Bit |
| Drill Bit for Metal |
| Sizes: (3.0mm x 61mm) & (4.0mm x 75mm) |
| Set: 2 Pieces |
| HSS-R |
| DIN 338 |
| Max. Strength: 900 N/mm², molten iron, plastics and metals non-ferrous metals |
| Drill Bits for cutting in metal with an angle in the tip 118° |
| Bisel spiral edge for a best evacuation from the good chip |
| Features: |
| The drill bits are suitable in combination with a machine equipped with a 10-13 mm drill bit |
| Minimum risk snapping diameters, possibility to Flex material |
| Wire helix with two outputs for an effective evacuation leftover material |