Mailtank
New
MAILTANK SELF-PRIMING JET PUMP 0.6HP SH107
| Specifications: |
| Power: 0.6HP |
| Voltage: 220-240v |
| Phase: single |
| RPM: 2850 |
| Frequency: 60 HZ |
| Maximum head: 36 Meters |
| Maximum volume: 36L/min |
| Features: |
| 100% copper winding to meet the standard peak power. |
| Built-in thermal overload protector for motor protection against high temperature. |
| max pressure can reach up to 40-50psi |
| Silent type motor for user’s comfort |
| Brass Impeller for longevity of use |
| Closed type motor, suitable use for outdoors |
New
MAILTANK SELF-PRIMING JET PUMP 1HP SH320
| Specifications: |
| Power source: 220V / 60Hz |
| Output: 1100W (1HP) |
| Suction Lift: 9M |
| Discharge Head: 40M |
| Capacity: 50L/min |
| RPM: 2850 |
| Suction & Discharge Pipe: 1” x 1” |
| Features: |
| PRIMING: Fill the pump completely with clean water before switching it on. The water should be poured in through the priming plug. When you have completed the operation, screw the plug back in again and start the pump. The pump should be primed again whenever it has not been used for a long period of time or when air has made its way into the system |
| IMPORTANT: Never run the pump empty. If this happens by mistake, switch the pump off, wait for it to cool down and then prime it using clean water |