Products
Related Products
MAKITA HSS-R DRILL BIT 4” (D-38364) 2PCS FOR METAL
| Specifications: |
| HSS-R Drill Bit |
| Drill Bit for Metal |
| Sizes: (3.0mm x 61mm) & (4.0mm x 75mm) |
| Set: 2 Pieces |
| HSS-R |
| DIN 338 |
| Max. Strength: 900 N/mm², molten iron, plastics and metals non-ferrous metals |
| Drill Bits for cutting in metal with an angle in the tip 118° |
| Bisel spiral edge for a best evacuation from the good chip |
| Features: |
| The drill bits are suitable in combination with a machine equipped with a 10-13 mm drill bit |
| Minimum risk snapping diameters, possibility to Flex material |
| Wire helix with two outputs for an effective evacuation leftover material |
MAKITA HSS-R DRILL BIT 5” (D-38401) FOR METAL
| Specifications: |
| HSS-R Drill Bit |
| Drill Bit for Metal |
| Sizes: (5.0mm x 86mm) & (6.0mm x 93mm) |
| Set: 1 Piece |
| DIN 338 |
| Max. Strength: 900 N/mm², molten iron, plastics and metals non-ferrous metals |
| Drill Bits for cutting in metal with an angle in the tip 118° |
| Bisel spiral edge for a best evacuation from the good chip |
| Features: |
| The drill bits are suitable in combination with a machine equipped with a 10-13 mm drill bit |
| Minimum risk snapping diameters, possibility to Flex material |
| Wire helix with two outputs for an effective evacuation leftover material |
ARTU METAL HOLESAW 38MM
| APPLICATION – CAN BE USED IN: |
| Wood, Copper Wall |
| Hot Roll and Cold Roll Sheet, Plasterboard |
| Aluminum, Nickel |
| PVC / Plastics Sheets, Magnesium |
| Stainless (Thin Gauge), Tin |
MAKITA HSS-R DRILL BIT 3” (D-38336) 2PCS FOR METAL
| Specifications: |
| HSS-R Drill Bit |
| Drill Bit for Metal |
| Sizes: (3.0mm x 61mm) & (4.0mm x 75mm) |
| Set: 2 Pieces |
| HSS-R |
| DIN 338 |
| Max. Strength: 900 N/mm², molten iron, plastics and metals non-ferrous metals |
| Drill Bits for cutting in metal with an angle in the tip 118° |
| Bisel spiral edge for a best evacuation from the good chip |
| Features: |
| The drill bits are suitable in combination with a machine equipped with a 10-13 mm drill bit |
| Minimum risk snapping diameters, possibility to Flex material |
| Wire helix with two outputs for an effective evacuation leftover material |