Products
MAKITA HP332DWYE 21 N·M CORDLESS HAMMER DRIVER DRILL 12VMAX CXT™ LI-ION [KIT] (3/8″)
| Specifications: |
| Cordless Hammer Driver Drill CXT™ Li-Ion Kit |
| HP332DWYE |
| 21 N·m 12Vmax |
| Capacity Steel / Wood / Masonry: 10 / 28 / 8 mm (3/8″ / 1-1/8″ / 5/16″) |
| Chuck Capacity 0.8 – 10 mm (1/32″ – 3/8″) |
| Impacts Per Minute (IPM) High / Low: 0 – 22,500 / 0 – 6,750 |
| No Load Speed (RPM) High / Low: 0 – 1,500 / 0 – 450 |
| Max Fastening Torque Hard / Soft: 35 / 21 N·m (310 / 190 in.lbs.) |
| Max Lock Torque 32 N·m (280 in.lbs.) |
| Vibration Level Hammer Drilling into Concrete: 12.5 m/s² |
| Vibration K Factor Hammer Drilling into Concrete: 1.5 m/s² |
| Vibration Level Drilling into Metal: 2.5 m/s² or less |
| Vibration K Factor Drilling into Metal: 1.5 m/s² |
| Sound Pressure Level 82 dB(A) |
| Sound Power Level 93 dB(A) |
| Noise K Factor 3 dB(A) |
| Dimensions (L x W x H) 168x66x217 mm (6-5/8″x2-5/8″x8-1/2″) |
| Net weight 1.1 – 1.3 kg (2.4 – 2.8 lbs.) |
| SKU: | HP332DWYE |
| Category: | Hammer Drill |
| Tags: | #Hammerdriverdrill, #Makita |
| Share on: |
Related Products
MAKITA GB602W BENCH GRINDER 6″ 250W
| Specifications: |
| Bench Grinder |
| GB602W |
| Continuous rating Input: 250W |
| Wheel diameter: 150mm (6″) |
| Wheel width: 6.4mm (1/4″) / 16mm (5/8″) |
| Hole dia.: 12.7mm (1/2”) |
| H.P.: 1/3 |
| No load speed (RPM): 2,850 (50Hz) / 3,450 (60Hz) |
| Dimensions (L x W x H): 375x348x286mm |
MAKITA BO3700 FINISHING SANDER 3-5/8″ X 7-1/4″ 180W
| Specifications: |
| Finishing Sander |
| BO3700 |
| Continuous rating input 180W |
| Pad size 93mm x 185mm (3-5/8″ x 7-1/4″) |
| Abrasive paper size 93mm x 228mm (3-5/8″ x 9″) |
| Orbits per minute 10,000 |
| Overall length 254mm (10″) |
| Net weight 1.4kg (3.1lbs) |
| Power supply cord 2.0m (6.6ft) |
MAKITA 9553BKX ANGLE GRINDER 4” 710W WITH CARRYING CASE
| Specifications: |
| Angle Grinder with Carrying Case |
| Size: 4″ |
| 9553BKX |
| Continuous rating input: 710W |
| Wheel Diameter : 100 mm (4″) |
| No Load Speed (RPM) : 11000 |
| Dimensions: (L x W x H) 258x118x97 mm (10-1/8″x4-5/8″x3-13/16″) |
| Net weight : 1.5 – 1.9 kg (3.3 – 4.1 lbs) |
| Power supply cord : 2.5 m (8.2 ft.) |
MAKITA HP1630 HAMMER DRILL 5/8″ 710 WATTS
| Specifications: |
| HP1630 |
| 710 Watts |
| Genuine Makita HP1630 Hammer Drill |
| Continuous power input: 710 W |
| With Variable speed |
| Reversing Hammer Drill |
| No load speed: 3,200 rpm |
| Drilling capacity on steel: 13 mm (1/2″) |
| Drilling capacity on wood: 30 mm (1-3/16″) |
| Drilling capacity on concrete: 16 mm (5/8″) |
| Impact per minute 0-48,000 ipm |
| Dimensions: 29.6 cm x 7.5 cm x 20.4 cm |
| Power supply cord 2m (6.6ft) |
| Supplied with Makita Hard Case |