Products
MAKITA HP332DWYE 21 N·M CORDLESS HAMMER DRIVER DRILL 12VMAX CXT™ LI-ION [KIT] (3/8″)
| Specifications: |
| Cordless Hammer Driver Drill CXT™ Li-Ion Kit |
| HP332DWYE |
| 21 N·m 12Vmax |
| Capacity Steel / Wood / Masonry: 10 / 28 / 8 mm (3/8″ / 1-1/8″ / 5/16″) |
| Chuck Capacity 0.8 – 10 mm (1/32″ – 3/8″) |
| Impacts Per Minute (IPM) High / Low: 0 – 22,500 / 0 – 6,750 |
| No Load Speed (RPM) High / Low: 0 – 1,500 / 0 – 450 |
| Max Fastening Torque Hard / Soft: 35 / 21 N·m (310 / 190 in.lbs.) |
| Max Lock Torque 32 N·m (280 in.lbs.) |
| Vibration Level Hammer Drilling into Concrete: 12.5 m/s² |
| Vibration K Factor Hammer Drilling into Concrete: 1.5 m/s² |
| Vibration Level Drilling into Metal: 2.5 m/s² or less |
| Vibration K Factor Drilling into Metal: 1.5 m/s² |
| Sound Pressure Level 82 dB(A) |
| Sound Power Level 93 dB(A) |
| Noise K Factor 3 dB(A) |
| Dimensions (L x W x H) 168x66x217 mm (6-5/8″x2-5/8″x8-1/2″) |
| Net weight 1.1 – 1.3 kg (2.4 – 2.8 lbs.) |
| SKU: | HP332DWYE |
| Category: | Hammer Drill |
| Tags: | #Hammerdriverdrill, #Makita |
| Share on: |
Related Products
New
MAKITA BO4556 FINISHING SANDER 200W (4-3/8″ X 4″)
| Specifications: |
| Finishing Sander |
| BO4556 |
| Continuous rating input: 200W |
| Pad Size: 112 x 102 mm (4-3/8″ x 4″) |
| Abrasive Paper Size: 114 x 140 mm (4-1/2″ x 5-1/2″) |
| Orbits Per Minute (OPM): 14,000 |
| Dimensions: 131x112x141 mm (5-1/8″x4-3/8″x5-9/16″) |
| Net weight: 1.1 kg (2.5 lbs) |
| Power supply cord: 2.0 m (6.6 ft) |
MAKITA ANGLE GRINDER 9556HN
| Specifications: |
| 840W |
| 220-240V |
| 50-60Hz |
| 11000/min |
New
MAKITA HP1630 HAMMER DRILL 5/8″ 710 WATTS
| Specifications: |
| HP1630 |
| 710 Watts |
| Genuine Makita HP1630 Hammer Drill |
| Continuous power input: 710 W |
| With Variable speed |
| Reversing Hammer Drill |
| No load speed: 3,200 rpm |
| Drilling capacity on steel: 13 mm (1/2″) |
| Drilling capacity on wood: 30 mm (1-3/16″) |
| Drilling capacity on concrete: 16 mm (5/8″) |
| Impact per minute 0-48,000 ipm |
| Dimensions: 29.6 cm x 7.5 cm x 20.4 cm |
| Power supply cord 2m (6.6ft) |
| Supplied with Makita Hard Case |
New
MAKITA HAMMER DRILL (10MM) 500W M-SERIES M0800M
| Specifications: |
| Hammer Drill |
| M0800M |
| Size: 10mm |
| 500W |
| M-Series |
| Capacity Concrete: 10 mm (3/8″) |
| Steel: 10 mm: (3/8″) |
| Wood: 20 mm: ( 13/16″) |
| Chuck Capacity: 1.5 – 10 mm (1/16″ – 3/8″) |
| Blows Per Minute BPM: 0 – 48,000 |
| No Load Speed RPM: 0 – 3,200 |
| Power supply cord: 2.0 m (6.6 ft) |