Products
MAKITA HSS-R DRILL BIT 5” (D-38401) FOR METAL
| Specifications: |
| HSS-R Drill Bit |
| Drill Bit for Metal |
| Sizes: (5.0mm x 86mm) & (6.0mm x 93mm) |
| Set: 1 Piece |
| DIN 338 |
| Max. Strength: 900 N/mm², molten iron, plastics and metals non-ferrous metals |
| Drill Bits for cutting in metal with an angle in the tip 118° |
| Bisel spiral edge for a best evacuation from the good chip |
| Features: |
| The drill bits are suitable in combination with a machine equipped with a 10-13 mm drill bit |
| Minimum risk snapping diameters, possibility to Flex material |
| Wire helix with two outputs for an effective evacuation leftover material |
| SKU: | D-38401 |
| Category: | Drill Bit |
| Tags: | #Makita, drillbit |
| Share on: |
Related Products
MAKITA HSS-R DRILL BIT 3” (D-38336) 2PCS FOR METAL
| Specifications: |
| HSS-R Drill Bit |
| Drill Bit for Metal |
| Sizes: (3.0mm x 61mm) & (4.0mm x 75mm) |
| Set: 2 Pieces |
| HSS-R |
| DIN 338 |
| Max. Strength: 900 N/mm², molten iron, plastics and metals non-ferrous metals |
| Drill Bits for cutting in metal with an angle in the tip 118° |
| Bisel spiral edge for a best evacuation from the good chip |
| Features: |
| The drill bits are suitable in combination with a machine equipped with a 10-13 mm drill bit |
| Minimum risk snapping diameters, possibility to Flex material |
| Wire helix with two outputs for an effective evacuation leftover material |
ARTU SDS PLUS MASONRY 14MM
| SDS Plus drill bit for drilling in concrete, brick, |
| stone, marble, tile, plaster and other masonry materials |
| For use in SDS plus hammer drills only |
| Shank is made from chrome canadium steel |
| for maximum strength and flexability |
| Positiv drive slots deliver maximum drill torque |
Out of stock
LOTUS HSS-G DRILL BIT 3.5MMX5X64″ LTHG0532-B10
| Diameter (D) mm: 3.5 | Working length (L1) mm: 39 |
| Total length (L2) mm: 70 |
MAKITA HSS-R METAL DRILL BIT 1.5 (METAL) D-38299
| Specifications: |
| Diameter: 1,5 mm |
| Length: 40 mm |
| Working Length: 18 mm |