Products
MAKITA HSS-R DRILL BIT 4” (D-38364) 2PCS FOR METAL
| Specifications: |
| HSS-R Drill Bit |
| Drill Bit for Metal |
| Sizes: (3.0mm x 61mm) & (4.0mm x 75mm) |
| Set: 2 Pieces |
| HSS-R |
| DIN 338 |
| Max. Strength: 900 N/mm², molten iron, plastics and metals non-ferrous metals |
| Drill Bits for cutting in metal with an angle in the tip 118° |
| Bisel spiral edge for a best evacuation from the good chip |
| Features: |
| The drill bits are suitable in combination with a machine equipped with a 10-13 mm drill bit |
| Minimum risk snapping diameters, possibility to Flex material |
| Wire helix with two outputs for an effective evacuation leftover material |
| SKU: | D-38364 |
| Category: | Drill Bit |
| Tags: | #Makita, drillbit |
| Share on: |
Related Products
ARTU SDS PLUS MASONRY 10MM
| SDS Plus drill bit for drilling in concrete, brick, |
| stone, marble, tile, plaster and other masonry materials |
| For use in SDS plus hammer drills only |
| Shank is made from chrome canadium steel |
| for maximum strength and flexability |
| Positiv drive slots deliver maximum drill torque |
New
MAKITA UB1100 BLOWER
| Specifications: |
| UB1100 |
| Continuous rating Input: 600 W |
| Air volume: 2.8 m³/min |
| Air pressure: 5.5 kPa (560 mm H2O) |
| No load speed (RPM): 16,000 |
| Overall length: 480 mm (18-7/8″) |
| Net Weight: 1.9 kg (4.1 lbs) |
ARTU METAL HOLESAW 38MM
| APPLICATION – CAN BE USED IN: |
| Wood, Copper Wall |
| Hot Roll and Cold Roll Sheet, Plasterboard |
| Aluminum, Nickel |
| PVC / Plastics Sheets, Magnesium |
| Stainless (Thin Gauge), Tin |
MAKITA ANGLE GRINDER 9556HN
| Specifications: |
| 840W |
| 220-240V |
| 50-60Hz |
| 11000/min |